VBH OMA KAUBAMÄRK.
HOME /VBH WORLDWIDE /IMPRINT /DATA PROTECTION /TERMS /CONTACT /
 
 
        

matt brushed


Tehniline andmeleht
   DG 58.S216.ZA.ER.SS PZ 92

The greenteQ lever handle DG 58.S216.ZA.ER.SS PZ 92 is made of non-rusting stainless steel and has a plate width of 35 mm. The handle is prepared for a profile cylinder, with a spacing of 92 mm. The outer plate has a cylinder cover for a protruding cylinder length of 5–10 mm. The cylinder cover is a special protection device and prevents the lock cylinder from being drilled open. The greenteQ lever handle DG 58.S216.ZA.ER.SS. PZ 92 with this spring-mounted cylinder cover offers sufficient extraction protection for a profile cylinder built into the lock. The levers are mounted in such a way that they are stationary/rotatable and have a holding spring. The greenteQ lever handle DG 58.S216.ZA.ER.SS PZ 92 is preconfigured for an 8 mm square spindle. The outer plate has supporting cams and is fixed in place by means of a concealed screw connection, for which a separate accessories set (3 x M6 screws, 1 x 8 mm square spindle) is required.

 

Technical data:

 

Mounting:   Stationary / rotatable with holding spring
Square spindle:          8 mm
Plate dimensons: 35 x 245 mm
Edge height:  10.5 mm
Spacing:    92 mm PZ
Cylinder protrusion: 5 - 10 mm

  

Material Surface Square spindle VBH Item-No.
Stainless steel matt brushed for 8 mm 217.270/8198

greenteQ Set of accessories DG 58.AL/ER.SS:

Door thickness VBH Item-No.
Door thickness 59 - 65 mm 391.961/5965
Door thickness 64 - 70 mm 391.961/6470
Door thickness 69 - 75 mm 391.961/6975
Door thickness 74 - 80 mm 391.961/7480
Door thickness 79 - 85 mm 391.961/7985
Door thickness 84 - 90 mm  217.274/5378
Door thickness 89 - 95 mm 391.961/8995
Door thickness 94 - 100 mm 217.269/9195

 


Accessories
Drilling jig set V II (217.270/4922)


TAGASI TOOTE ÜLEVAATESSE
PRINDI LEHEKÜLG