The greenteQ lever handle DG 58.S216.ZA.AL.SSN PZ 92 is made of aluminium and has a plate width of 35 mm. The handle is prepared for a profile cylinder, with a spacing of 92 mm. The outer plate has a cylinder cover for a protruding cylinder length of 5–10 mm. The cylinder cover is a special protection device and prevents the lock cylinder from being drilled open. The greenteQ lever handle DG 58.S216.ZA.AL.SSN PZ 92 with this spring-mounted cylinder cover offers sufficient extraction protection for a profile cylinder built into the lock. The lever is mounted on the inner plate in such a way that it is stationary/rotatable and has a holding spring. The lever on the outer plate is low. The greenteQ lever handle DG 58.S216.ZA.AL.SSN PZ 92 is preconfigured for an 8 mm square spindle. The outer plate has supporting cams and is fixed in place by means of a concealed screw connection, for which a separate accessories set (3 x M6 screws, 1 x 8 mm square spindle) is required.