MOČNA LASTNA ZNAMKA.
HOME /VBH WELTWEIT /IMPRESSUM /DATENSCHUTZ /AGB /KONTAKT /
 
 
        

matt brushed


List podatkov o proizvodu
   DG 58.S216.ZA.ER.SSN PZ 92

The greenteQ lever handle DG 58.S216.ZA.ER.SSN PZ 92 is made of non-rusting stainless steel and has a plate width of 35 mm. The handle is prepared for a profile cylinder, with a spacing of 92 mm. The outer plate has a cylinder cover for a protruding cylinder length of 5–10 mm. The cylinder cover is a special protection device and prevents the lock cylinder from being drilled open. The greenteQ lever handle DG 58.S216.ZA.ER.SSN PZ 92 with this spring-mounted cylinder cover offers sufficient extraction protection for a profile cylinder built into the lock. The lever is mounted on the inner plate in such a way that it is stationary/rotatable and has a holding spring. The lever on the outer plate is low. The greenteQ lever handle DG 58.S216.ZA.ER.SSN PZ 92 is preconfigured for an 8 mm square spindle. The outer plate has supporting cams and is fixed in place by means of a concealed screw connection, for which a separate accessories set (3 x M6 screws, 1 x 8 mm square spindle) is required.

 

Technical data:

 

Mounting:   Stationary 7 rotatable with holding spring
Square spindle:          8 mm
Plate dimensions: 35 x 245 mm
Edge height:  10.5 mm
Sapcing:    92 mm PZ
Cylinder protrusion: 5 - 10 mm

 

Material Surface Square spindle VBH Item-No.
Stainless steel matt brushed for 8 mm 398.501/8223

  greenteQ Set of accessories DG 58.AL/ER.SSN:
 

Door thickness VBH Item-No.
Door thickness 59 - 65 mm 398.502/5965
Door thickness 64 - 70 mm 398.502/6470
Door thickness 69 - 75 mm 398.502/6975
Door thickness 74 - 80 mm 398.502/7480
Door thickness 79 - 85 mm 398.502/7985
Door thickness 84 - 90 mm 217.269/9209
Door thickness 89 - 95 mm 217.269/9210
Door thickness 94 - 100 mm 217.269/9211

 


ibGreenteqAccessories
Drilling jig set V II (217.270/4922)


ibBackToProductoverview
TISKAJ